Starter Kit: special DC DC converters kit for start up support

Power up support kit for liquid cooled and air cooled DC DC converters

Description

Tame-Power developed the Starter Kit which aims to facilitate all DC DC converters ranges start up and power up:

  • Non-isolated liquid-cooled DC DC HVHV converters from 1kW to 136 kW
  • Non-isolated air-cooled DC DC HVHV converters from 1kW to 32 kW
  • Isolated liquid-cooled DC DC HVLV converters from 1kW to 68 kW

The Starter Kit aims to expedite Tame-Power DC DC converters power up thanks to its dedicated content: Tame-Power HMI, CAN communication probe, PEAK CAN driver software, communication and power cables.

The Starter Kit is available in two versions according to DC DC converters cooling system: Starter Kit for liquid cooled DC DC converters and Starter Kit for air cooled DC DC converters which are adapted to DC DC converters cooling type they accompany.

Contact

Tame-Power products

HV HV DC DC converters

HV LV DC DC converters

Starter Kit technical specifications

The Starter Kit, either being dedicated to Tame-Power liquid cooled DC DC converters or Tame-Power air cooled DC DC converters, allows DC DC converters monitoring through direct PC and power source connection. Moreover, Tame-Power HMI -which is provided with Starter Kit- proposes an easy handling use interface giving access to DC to DC converters main functions. 

The Starter Kit contains:

  • Tame-Power HMI software
  • CAN PEAK probe: PEAK IPEH-002021
  • PEAK driver software for PC: CD or internet
  • Power and communication cable: adapted to liquid or air cooling systems

Tame-Power HMI software

Tame-Power HMI software allows user to: 

  •  Consult measures sent by DCDC on CAN network which are displayed in Information area (green box).
  • Access to settings of the DCDC converter which are displayed in the orange green box.
  • Control the converter using the blue box enable mode and type of regulation, starting and stopping the converter, resetting errors or modifying accessible parameters.
  • Consult messages, warnings, and errors produced by the converter which are displayed in the red box.
  • Access to the user manual through the HMI.

PEAK CAN probe

  • USB connection to PC: Full-Speed mode, compliant with USB 1.1, USB 2.0, and USB 3.0.
  • Galvanic isolation of up to 500 Volts between PC and CAN side.
  • Compliant with CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID).
  • CAN bus connection via D-Sub, 9-pin (in accordance with CiA® 303-1.

Power and communication cables

Starter Kit – For liquid cooled DC DC converters ranges

  • Connection to power supply: 4 mm banana plugs.
  • Connection to Converter: Phoenix M12.
  • Connection to PEAK Probe: DB9 (male).
  • Cable length: 3000 mm.
  • Cable diameter: 6.5 mm.
  • DCDC power supply: 10V to 32V, 2 A.

Starter Kit – For air cooled DC DC converters range

  • Connection to power supply: 4 mm banana plugs.
  • Connection to Converter: Phoenix M12.
  • Connection to PEAK Probe: DB15 (male).
  • Cable length: 3000 mm.
  • Cable diameter: 6.5 mm.
  • DCDC power supply: 12 or 24V, 2 A.

Associated service: custom-made DC DC converters design and manufacturing

Expert in power electronics, Tame-Power designs and produces the set of its products. By means of its experience and generic products available, Tame-Power offers its expertise in power electronics throughout the entire product life cycle:

  • Innovation and definition of electrical architectures: advice on the development of electrical architectures, optimisation and validation of technical solutions in correlation with the target application market,
  • Detailed design: definition of specific parameters, electronic, software, mechanical and aesthetic adaptation,
  • Industrialization, validation and launch phase: industrialization and testing,
  • Serial production: assembly and integration,
  • After-sales service: start-up assistance, integration, on-site or remote diagnostics.
See