Non-isolated HV HV DC DC converters

Single and double size non isolated liquid cooled power conversion units

Contact us

Nom(Required)

By phone

+33 2 51 24 43 66

By email

contact@tame-power.com

Description

Tame-Power High-Voltage /High-Power non-isolated liquid-cooled simple unit DC DC converters allow to transfer up to 120 kW.

Available in their initial setup, non-isolated liquid-cooled simple unit DC DC converters allow the adjustment of their parameters to adapt to your environment and constraints. 

    Technical specifications of non-isolated liquid-cooled simple unit DC DC converters range

    Non-isolated liquid-cooled simple unit DC DC converters are able to:

    • Operate on 35V to 950V voltage ranges
    • Generate an output power up to 120 kW
    • Integrate to both stationary and embedded applications
    • Transfer power in both boost and buck mode (bidirectional DC to DC converters)
    • Integrate several control modes in input or in output: current, voltage and power
    • Integrate a specific mode to battery charge
    • Combine several DC DC converters to increase the total output power

    Power

    Tame-power DC DC converters CONVY L S range allow to transfer up to 120 kW. The optimal distributed power level depends on system parameters and on voltage input and output ranges. Tame-Power proposes an individual support to ensure the perfect match between Tame-Power products, your specific needs and applications. 

    Voltage

    Tame-Power non-isolated liquid-cooled simple unit DC DC converters are predisposed to operate on voltage ranges from 35V to 950V in input or in output. 

    Cooling

    Tame-Power CONVY DC DC converters use liquid cooling:

    • Liquid coolant: 50% glycoled water
    • Flow rate: minimum: 3 L/min., typ. : 5 L/min., maximum : 7 L/min.
    • Pressure: maximum: 5 bar
    • Inlet liquid temperature: minimum : -20°C, maximum : +65°C.

    Regulation modes

    Tame-Power non-isolated liquid-cooled simple unit DC DC converters are easy to execute and are managed by CAN messaging. Tame-Power products integrate several control modes, in input or output: current, voltage, power.

    Tame-Power non-isolated liquid-cooled simple unit DC DC converters beneficiate from an embedded intelligence allowing to optimize the output power on each operating point.

    Starter kit

    Tame-Power developed the Starter Kit which aims to facilitate non-isolated liquid-cooled simple unit DC DC converters start up and power up. The Starter Kit aims to expedite Tame-Power DC DC converters power up thanks to its dedicated content: Tame-Power HMI, CAN communication probe, PEAK CAN driver software, communication and power cables. 

    f

    Customization

    For your specific needs, Tame-Power proposed to adjust its catalogue references to make available products:

    • Meeting your specific needs on the basis of Tame-Power catalogue products
    • Allowing to optimize your time requirements at controlled costs
    • Permitting to propose a product which is specifically adjusted to your application environment

    DC DC converters racks

    Tame-Power DC DC converters are assemblable to increase the total output power. Hence, Tame-Power proposes to associate up to 10 power conversion modules per system, allowing to reach output power in order of megawatts. 

    Mecanics

    Non-isolated liquid-cooled simple unit DC DC converters weigh 11kg per unit:

    You may be interested in...