Tame-Power: manufacturer of DCDC converters for stationary applications
Power conversion solutions for low-carbon mobility and stationary applications
Electrical network
Transformer
Batteries / Energy Storage
Charging Port / 200-850 V
Battery Pack / 800 V
Convy DCDC HV-HV
Convy DCDC HV-HV
Contact
Towards a low-carbon mobility…
The market for electric mobility on land, air, space and sea is booming. The deployment of recharging infrastructures is therefore becoming a priority for public and private authorities. By 2030, the global market for electric vehicle charging infrastructure is expected to exceed $415 billion.
The development of new modes of transportation and the desire to move towards greener mobility have led Tame-Power to address the electric mobility market through stationary applications and more precisely on four major types of charging points:
- Level 1 charging points: charging points which are intended for housing, using alternative current (AC), and needing a very long charge time
- Level 2 charging points: charging points which are geared towards companies or collective housing, using alternative current (AC), and needing a long charge time
- Level 3 charging points or fast chargers: charging points intended for public areas and shopping facilities, using direct current (DC), and providing a fast charge time
- Level 4 charging points or ultrafast chargers: charing points geared towards public areas as shopping facilities, service stations and rest areas, using direct current (DC), and providing a very fast charge time.
Tame-Power's expertise in the automotive market for stationary applications
High voltage DC DC converters
Tame-Power DC DC converters allow the transfer of 1kW to several megawatts over voltage ranges from 35V to 950V input or output.
DC-DC converters are capable of coupling different energy sources in hybrid architectures integrating: fuel cells, batteries, supercapacitors, rectifiers, drivetrains, resistors, etc. Tame-Power products integrate all the control modes for optimal operation. Tame-Power DC converters are capable of :
- Operate over a range of use from 35V to 950V
- Generate an output power of 1kW to 120kW per module
- Transfer energy in buck or boost mode (reversible DC-DC converters)
- Integrate numerous input or output regulation modes: current, voltage and power
- Integrate a specific mode for battery charging
- Combine several DC-DC conversion modules to increase the total distributed power
Customization
For specific requests, Tame-Power offers to adjust its references in order to provide you with DC-DC converters that :
- Meet your specific needs based on catalog products,
- Allow you to optimize your planning constraints at controlled costs.
Custom DC DC converters
Tame-Power supports its customers in the development of custom converters throughout the product life cycle: from the definition of the electrical architecture to the support of the product integration. Tame-Power offers to design and produce specific DC-DC converters from 1kW to several megawatts and from 35V to 950V.
Converter racks
Tame-Power DCDC converters can be combined in parallel to increase the total power transferred. Thus, Tame-Power proposes to combine up to ten converter modules.
Tame-Power use cases for stationary applications
Convertisseurs DC DC pour Engie Solutions
La solution Charge&go utilise plusieurs convertisseurs DCDC Tame-Power de plus de 40 kW chacun, couplés par le biais d’un système d’interconnexion propriétaire pour charger un ou plusieurs bus en même temps.
Engie Solutions a sélectionné Tame-Power pour ses convertisseurs DCDC internes, la flexibilité de leurs modes de contrôle, leur capacité de puissance et de refroidissement de l’air.